SITRANS F C MC2 Coriolis Mass Flow Meter

The SITRANS F C MC2 coriolis mass flow meter is available as a standard version (DN 50 to DN 150 (2” to 6”)) and a hygienic, EHEDG-certified version (DN 20 to DN 80 (¾” to 3”)). MC2 and MC2 hygienic are both suitable for accurate mass flow measurement of a variety of liquids and gases.
The SITRANS coriolis mass flow meter offers superior performance in terms of flow accuracy, turn-down range and density accuracy and delivers true multi-parameter measurements i.e.: mass flow, volume flow, density, temperature and fraction flow .The very compact sensor construction makes installation and commissioning easy and straight forward.

Design

The MC2 coriolis mass flow meter consists of 2 parallel measuring pipes, welded directly onto a flow-splitter at each end to eliminate a direct coupling to the process connectors and significantly reduce effects from external vibrations. The sensor is available in 2 material configurations, AISI 316L or Hastelloy C4 with a wide variety of process connections. The flow-splitters are welded onto a rigid sensor housing which acts as a mechanical low-pass filter.

The enclosure is made of stainless steel AISI W 304 1.4301 with an ingress protection rating of IP67/NEMA 4. The sensor is Ex-approved EEx em [ib] IIC. The coriolis flow meter can be installed (and is self draining in) both a horizontal or vertical position. The MC2 is designed for increased safety and can therefore only be connected to: MASS 6000 19” or SIFLOW FC070 Ex standard versions which have to be remote mounted in the safe area. For all non-hazardous applications the complete MASS 6000 transmitter program can be used, though only remote mounted.

Benefits

• High accuracy - better than 0.15% of mass flow rate
• Large dynamic turn-down range
• Space-saving split-flow sensor design facilitating low pressure loss
• Parallel S-tube design and optimal oriented inductive sensors enhances accuracy and turn-down range
• Densitometer performance available through a density accuracy better than 0.001 g/cm3
• Self-draining in both horizontal and vertical position
• Rigid enclosure design reduces the influence from pipeline vibration and thermal stress
• 4-wire Pt100 temperature measurement ensures optimum accuracy on mass flow, density and fraction flow
• SENSORPROM enables true "plug & play". Installation and commissioning in less than 10 min
• Safe Ex-design EEx em [ib] IIC.
• The sensor calibration factor is also valid for gas measurement.
• Sensor pipe available in high-quality AISI 316L stainless steel W 1.4571 or Hastelloy C4 W 2.4610 offering optimum corrosion resistance

Fabriqué par: Siemens-Milltronics
Modéle: SITRANS F C MC2 Coriolis Mass Flow Meter